Table of Contents
Advertisement
COOLING OPERATION
Use the device for cooling when the outdoor temperature is -10 to 42°C.
If humidity is very high (over 80%) indoors, some dew may form on the air outlet grille of the indoor
unit.
1
Press the FUNCTION selector so that the display indicates
(COOL).
Set the desired FAN SPEED with the
(the display indicates the setting).
(AUTO)
2
(HI)
(MED)
(LOW)
(SILENT) : Silent.
Set the desired room temperature with the TEMPERATURE
buttons (the display indicates the setting).
3
The temperature setting and the actual room temperature may
vary somewhat depending on conditions.
Press the
with a beep. Press the button again to stop operation. The cooling
function does not start if the temperature setting is higher than
START
the current room temperature (even though the
STOP
lamp lights).
The cooling function will start as soon as you set the temperature
below the current room temperature.
■ As the settings are stored in memory in the remote controller, you
only have to press the
(FAN SPEED) button
: The FAN SPEED is HI at first and varies to MED
automatically when the preset temperature has
been reached.
: Economical as the room will become cool quickly.
: Quiet.
: More quiet.
(START/STOP) button. Cooling operation starts
(OPERATION)
(START/STOP) button next time.
– 10 –
FAN OPERATION
You can use the device simply as an air circulator. Use this function to dry the interior of the indoor unit
at the end of summer.
1
Press the FUNCTION selector so that the display indicates
(FAN).
Press the
(HI)
2
(MED)
(LOW)
(SILENT) : Silent.
Press the
START
beep.
STOP
Press the button again to stop operation.
... When the AUTO fan speed mode is set in the cooling/heating operation:
FAN SPEED (AUTO)
• The fan speed will automatically change according to the temperature of
discharged air.
For the heating operation
• As room temperature reaches the preset temperature, a very light breeze
will blow.
• Operation starts in the "HI" mode to reach the preset temperature.
For the cooling operation
• As room temperature approaches the preset temperature, fan speed auto-
matically switches to "LOW".
(FAN SPEED) button.
: The strongest air blow.
: Quiet.
: More quiet.
(START/STOP) button. Fan operation starts with a
– 11 –
Advertisement
Table of Contents
