Nikon Coolpix 5700 Firmware Update page 5

Untitled Document
CompactFlash Card Reader
1
Connect the card reader to the computer.
For more information, see the documentation provided with the card reader.
2
Insert the formatted memory card into the card reader.
If Nikon View has been installed on the computer, Nikon Transfer will start automatically and display the
message, "Camera or card contains no images. Nikon View will now terminate." Click OK to exit Nikon Transfer.
3
Copy the firmware to the memory card.
3- Copy the firmware to the removable disk corresponding to the memory card.
1. When the memory card is inserted, a new "Removable Disk" icon will be displayed in My Computer. Copy the
"firmware" folder from the "CP5700fw11" folder to this removable disk.
Drive letters may differ
3- When copying is complete, check the contents of the removable disk.
2. Open the "firmware" folder on the removable disk and confirm that it contains the file "firmware.bin."
3- Remove the memory card.
3. Right click on the removable disk and select Eject from the menu that appears. Remove the memory card
from the card reader.
4
Disconnect the card reader.
For more information, see the documentation provided with the card reader.
Update the camera firmware
Should any of the following occur during the update, the Coolpix 5700 could become inoperable:
• The memory card is removed from the camera
• The camera is turned off
• The AC adapter is unplugged or disconnected
• The battery is removed
• The camera is subjected to powerful electromagnetic noise
If you are not confident that you can perform the update successfully, the update can be performed by a
Nikon service representative.
1
Insert the memory card containing the firmware into the Coolpix 5700.
file:///K|/5700fw11WIN.html (5 of 7) [6/21/2010 2:31:05 PM]