Table of Contents
Advertisement
3.3
Protection Housing and sealing
As indicated in image 1, the cover of the terminal blocks can be sealed after installation.
The assembled meter base and meter cover will be protected against unauthorized opening
with a manufacturer label (format 8x20 mm, corner radius 0.5 mm) on both sides of the hous-
ing
Attention!
Damage of the terminals due to high torque
The specified maximum torques must not be exceeded!
Ensure that the connected lines are fixed with the needed torque compliant to
EN 60999 for a safe connection. The needed torque depends on the type of used
lines and the maximum current.
Important
Warranty and accuracy are void if sealing labels are removed.
13 /17
Advertisement
Table of Contents
