Related Manuals for Jebao MDP Series
Summary of Contents for Jebao MDP Series
- Page 1 Smart DC Pump USER MANUAL MDP Series MDP-2500、MDP-3500、MDP-5000、 MDP-6000、MDP-8000、MDP-10000、 MDP-13000、MDP-15000、MDP-20000...
- Page 2 Smart DC Pump WARNING ： ●Please use the matched adapter and related accessories. ●Do not put the pump in the flammable, explosive and corrosive liquid. ●Do not use the pump in the water temperature above 35℃. ●Maximum water depth 1.5M. ●Do not immerse the plug into water or other liquid.
-
Page 3: Pump Features
Smart DC Pump I. Introduction JEBAO DC pump is a inspected and tested to ensure the safety and operating performance product. Please read this manual carefully, before operating correctly. In case of the improper usage, or maintenance to cause the pump damage. - Page 4 Smart DC Pump suction of sundries and affect the pump performance. The pump conjunction connector is designed with standard size thread, which can be connected to the common fountain heads and water pipes. ② Used as dry-use pump: the pump should be placed lower than the horizontal level to ensure water flowing into the water pump.
-
Page 5: Controller Features
Smart DC Pump CAUTION: ●Always disconnect the pump from the power supply before cleaning, maintenance and handling. ●Try to avoid the pump dry working. ●Do not lift the pump by holding the power cord only. In case of the cable connection off inside of the pump ●Do not use the pump in the heating liquid. -
Page 6: Operation Function
Smart DC Pump keeping the same parameter. Operation Function: Display Screen ON/OFF Wi-Fi button Flow turn down Flow turn up Feed/Pause Controller Panel 1.Operation Function Description After power on the pump, the display screen will come the WIFI icon, operating power and working step. The operating power shows”... - Page 7 Smart DC Pump The Display Screen will shows the instant working condition, you can set different power per your need. When the user presses the " "button, "FEED 10 min" is displayed on the screen, the feeding mode is started. Press “...
- Page 8 Smart DC Pump more than 17 seconds, the display screen become in a slightly brightness, enters the screen protected mode. When any key is pressed, the display screen returns back to normal brightness. Meanwhile, long press the "▲ ▼" button to enter the screen brightness modulation mode, the "▼"...
- Page 9 The APP name “Jebao Aqua”, is available to download in App Store for Apple users, or Google Play for Android system users. The User can search “Jebao Aqua” in either App Store or Google Play to download the application. Alternative, the...
- Page 10 Smart DC Pump user may scan the barcode on the package or user manual to download the application. (Note: Scan function in certain countries or areas may be unavailable to read the barcode properly.) 2. User registration, login and password reset 2.1.
- Page 11 Smart DC Pump A. Open the Jebao Aqua App and tap Create new account. B. Choose email way to register, fill the information as required and tap Create account； C. After registration, return back to the login page. enter the account and password to log in.
- Page 12 Smart DC Pump V. App Application 1. Main page Add new devices Add new devices Go to Setting Go to My Group Series...
- Page 13 Smart DC Pump 2. Add new pump Tap My Devices. Tap “Add Now “ or tap the top right “ +” icon to add your device, tap the “Aqua Pump” Icon. Series...
- Page 14 Smart DC Pump Configuration mode: Make sure your phone is connected to 2.4G band Wi-Fi before configuration. There are two configuration modes, Smart configuration and AP configuration modes. Choose one mode to link your device. ① Smart Configuration mode ： After the device power on, the Wi-Fi icon on the upper left flashing, the device enters the smart configuration mode.
- Page 15 Smart DC Pump Follow the instructions. Enter Wi-Fi password and tap Next. Make sure your device, phone, and the router are as close as possible during the configuration process. The page will display all the devices. Choose the request add device, tap the device name, then tap ‘Confirm to add”...
- Page 16 Smart DC Pump Tap “Start” to start using your device. ② AP Configuration mode ： Long press the Wi-Fi button for 5 seconds before distributing network, see the Wi-Fi with AP icon flashes on the upper left of the screen, then the device enters the AP network distribution mode.
- Page 17 Smart DC Pump Choos the confirmation “ Device is in AP configuration mode” and tap “Next” Enter the correct Wi-Fi password and tap “Next” Series...
- Page 18 Smart DC Pump PS: Due to the different operating system, IOS and Android will operate differently in the following details. A. IOS System： After entering the Wi-Fi password, you need to switch manually the phone Wi-Fi to "Jebao_WiFi-xxxx", the specific operation as below: Tap Go to settings.
- Page 19 Tap “Settings” in the upper left corner to enter the mobile phone settings page, then enter the WIFI setting page as below. Go to WIFI Settings page > choose the “Jebao_WiFi-xxxx” with password 123456789. Connecting the Jebao -WiFi. 123456789 Series...
- Page 20 Smart DC Pump After connection successfully, return back to the APP. Enter into the APP, The configuration starts automatically. Tap “Start” to control the device after the device has been added successfully. Series...
- Page 21 Smart DC Pump B. Android System After input the Wi-Fi password, tap “Next” and choose the device to start configuration. If the device cannot be found, go to Phone Settings page>Wireless & networks > WLAN to turn off and turn on the WLAN switch. The device will be displayed.
-
Page 22: Pump Control
Smart DC Pump 3. Pump control After adding the pump device successfully, long press the pump icon for 2 seconds to enter the pump control page. Manual mode: Drag the arc progress bar (stop draging then effective), Change the gear value of the pump. The minimum step is 30 and the maximum step is 100. - Page 23 Smart DC Pump Manual feeding mode: The pump will stop working immediately when arrive the feeding time. Press the "Feed" icon for 2 seconds to enter the feeding settings. Set the feeding pause time, turn on the feeding switch, then tap save and return.
-
Page 24: Program Mode
Smart DC Pump Program mode Long press the "Plan" icon 2 seconds to enter the setting page and set the working mode of the pump at various time every day, including the pump stop, automatic and feeding mode. Tap the circle twice Choose the mode Tap the "Stop or Auto, Feed"... - Page 25 Smart DC Pump Adjust time slider Time switch button End time setting Start time setting Mode selection Gears setting ① Double-click the circle blank area to add the plan time period or use the time switch button to switch to the circle blank area to automatically add the plan time period.
- Page 26 Smart DC Pump ④ ① ③ ② ④ ⑤ After finish the setting, return back to the main page and tap the “plan” icon to run the program mode. PS: The plan mode will be closed if you set the flow stage by manual (Plan mode effective after ending the slide).
- Page 27 Smart DC Pump The user can change the pump name as want for easy management. The user can delete the current pump also. But when want to add the pump again, need to reconfigure the network. 5. Failure indicaton Series...
- Page 28 Smart DC Pump LED Error code and APP Error description: When the controller work unnormal, the controller will show the Error code and LED warning flashing, when enter the APP will pop-up the fault tips box. the ERROR code explanation as below: Er01: Abnomal Working current;...
-
Page 29: Maintenance
Smart DC Pump VI. Maintenance If the pump not work, check as following: ●Connect with another new power to check if the circuit is connected, disconnect the power before operation; ●Check the pump inlet and outlet, the connecting pipe if with dirty block;... - Page 30 Jebao Co.,Ltd. Add：Tongmao Industrial Park, Dongsheng Town, Zhongshan, Guangdong, China. Tel：+86-760-28136708, 28136720 E-mail： info@jebao.com Website: http://www.jebao.com...