Advertisement
Smart Wave Maker
USER'S MANUAL
WARNING：
1. To ensure performance, do not let the pump work dry.
2. Keep the controller at a dry place. Avoid water splashes on it.
3. Be careful when assembling the magnet base. Move parallel the magnet base
parallel the pad close to the outside wall of fish tank to prevent breaking the fish tank.
4. Do not disassemble the controller or adaptor without professional guidance.
MCP、MLW、MOW SERIES
Advertisement
Table of Contents
Related Manuals for Jebao MCP Series
Summary of Contents for Jebao MCP Series
- Page 1 Smart Wave Maker USER’S MANUAL WARNING： 1. To ensure performance, do not let the pump work dry. 2. Keep the controller at a dry place. Avoid water splashes on it. 3. Be careful when assembling the magnet base. Move parallel the magnet base parallel the pad close to the outside wall of fish tank to prevent breaking the fish tank.
-
Page 2: Function Feature
Smart Wave Maker I. Introduction Jebao wave makers are well designed as a good equipment to stimulate the natural sea environment by high technology, which offers a natural environment for different sea livings in the fish tank or in the pond. - Page 3 Smart Wave Maker frequency provides a safe environment for user. ●Easy operation to achieve the multiple sea moving. ●Flow direction can be adjusted by different modes needed. ●Hotspot(AP direct control function), which allows short distance wireless control by mobile phone without Wi-Fi network ●Large range of voltage input (AC100~240V 50/60Hz) allows to operate in various power system and prevent...
-
Page 4: Operation And Function
Smart Wave Maker and shift the magnet slant to the same position on the outside wall. Take care of your fingers to be clamped because of the strong magnetism of magnet. 4. Controller install, there is a hole to hang on the controller at any place in convenient. -
Page 5: Function Description
Smart Wave Maker : Press the button to set Master control, Slave control or operate individually.Long press to select distribution mode. : After entering the frequency adjustment mode, the period can be adjusted; Adjust the power; Press and hold the double keys at the same time to exit the timing mode;... - Page 6 Smart Wave Maker C. Introduction of each mode W1: Classic Wave Mode Remoting the button is necessary when operate this mode to adjust the wave patterns among one or more pumps at the same time. As the volume of water in tank is different from the tank capacity, wave period need to be adjusted by switching the button.
- Page 7 Smart Wave Maker shift wave and flow in alternately. P1 work, P2 stop; P2 work, P1 stop alternately. Feed Mode Function Short press the “ ” button, the pump stops working for 10 minutes and allow the fish to eat for 10 min. the pump recover work automatically after 10 min.
- Page 8 Smart Wave Maker V. Wi-Fi Icon and Wi-Fi Button Instruction Wi-Fi icon Wi-Fi Button ●Explanation of Wi-Fi Icon A. Wi-Fi icon flashes while the Pump is on smart configuration mode. B. Wi-Fi with AP icon flashing while the Pump is on AP configuration mode and AP direct connection mode.
- Page 9 C.Wi-Fi icon is often displayed after connection. APP Download and Instruction 1. Download The APP name “Jebao Aqua”, is available in App Store for Apple users and Google Play for Android system users. User can search “Jebao Aqua” in either APP Store or Google Play to download the application.
- Page 10 Smart Wave Maker User registration, login and password reset 2.1 Account registration ①Open Jebao Aqua App and tap Create new account; ②Fill in the information as required and tap Create account； ③After registration, return to the login page and put the account and password to log in.
- Page 11 Smart Wave Maker Note: please use Email to register, Phone number registration is valid for mainland China only. 2.2 Reset Password Tap “Forget Password” on the login page. Input your email address and tap Send link. Check your email and follow the instructions to reset your password.
-
Page 12: App Instructions
Smart Wave Maker VII. App Instructions 1. Add new pump Tap My Devices. Tap Add Now or “+” icon on the upper right side to add your devices, tap “Wave Pump” icon . MCP、MLW、MOW Series... - Page 13 Smart Wave Maker Configuration mode: Make sure your phone is connected to 2.4G band Wi-Fi before configuration. There are two types of configuration modes, Smart configuration and AP configuration modes. Choose one mode to link your device. ①Smart Configuration: After the device is powered on, the Wi-Fi sign on the upper left of the controller screen flashes, and the device enters the intelligent distribution network mode.
- Page 14 Smart Wave Maker tap “Next” to start smart configuration. Follow the instructions. Input the correct Wi-Fi password and tap “Next” Make sure your device, phone, and router are as close as possible MCP、MLW、MOW Series...
- Page 15 Smart Wave Maker during the configuration progress. The page will display all the devices. Choose the device you want to add and tap on the device name, then tap Confirm to add. Tap “Start” to start using your device. ② AP Configuration ：...
- Page 16 Smart Wave Maker Tap “AP Network “in the upper right corner of the Add device page to enter into AP configuration. Check the sentence “Device is in AP configuration mode “ and tap “Next” MCP、MLW、MOW Series...
- Page 17 Smart Wave Maker Input the Wi-Fi password and tap Next. Note: Due to different operating system, IOS and Android will be different in operation in the following details. IOS System： After entering the Wi-Fi password, you need to switch the Wi-Fi of the phone to "Jebao_WiFi-xxxx",as below. MCP、MLW、MOW Series...
- Page 18 Smart Wave Maker Tap “Go to settings” MCP、MLW、MOW Series...
- Page 19 Smart Wave Maker Tap “Settings” in the upper left corner to enter the mobile phone settings page. Go to Settings > Wi-Fi and connect to Jebao_WiFi-xxxx” with password 123456789. MCP、MLW、MOW Series...
- Page 20 Smart Wave Maker 123456789 After successful connection, tap Jebao Aqua on the upper left corner to return to the APP. The configuration starts automatically. Tap Start to control the device after the device has been added successfully. MCP、MLW、MOW Series...
- Page 21 Smart Wave Maker Android ： After input the Wi-Fi password, need to manually switch the Wi-Fi connection "Jebao_WiFi-xxxx". The specific operation is as follows. Click”Confirm”,Enter the mobile phone Wi-Fi setting page. MCP、MLW、MOW Series...
- Page 22 Smart Wave Maker On the Wi-Fi Settings screen, switch the Wi-Fi of the mobile phone to “Jebao_WiFi-xxxx”, and the password is 123456789. After the connection is successful, wait for a moment (the mobile phone automatically connects back to the Wi-Fi of the router), and the software displays a message indicating that the addition is successful.Tap "Start"...
- Page 23 Smart Wave Maker 1.In the APP login interface,tap the Access Point (direct) connection at the bottom right or tap the login to enter the main interface and select the Access Point (direct) connection in Settings. 2. Select the device type, check the confirmed device to enter AP hotspot mode and tap “Next”.
- Page 24 Smart Wave Maker 3. Select the Wi-Fi name of the device, tap Confirm .Jump to the phone Wi-Fi setting interface. 4.Select the hotspot "Jebao_WiFi-xxxx" issued by the device (the name is the same as the device name), enter the password 123456789 and top Connection.Manually return to APP after successful connection.
- Page 25 Smart Wave Maker 5. Wait for the device to connect, and top the device to enter the control interface. Notice： 1. You may be asked to restart configuration process all over again if the Wi-Fi password input is incorrect. 2. Make sure the device, mobile phone and router are placed as close as possible.
-
Page 26: Pump Control
Smart Wave Maker 3. Pump Control Pump switch Time indication Long press the icon Current flow for 2 seconds Wave model Mode setting In my device interface, long press the device icon for 2 seconds to enter the device control interface. Manual mode settings ：... -
Page 27: Classic Mode
Smart Wave Maker Switch button Making waves set Enter the manual setting interface and switch the wave-making mode by clicking the “<” and “>” button at the bottom of the page. Click the middle circle wave-making mode icon to set the specific flow value and frequency of wave-making. - Page 28 Smart Wave Maker Sine Wave Mode： Press or drag the bar to adjust the flow and the frequency. The minimum flow is 30%. The minimum frequency is 5%. Classic mode Sine wave mode Random Wave Mode： Random wave data generated by the system randomly.
-
Page 29: Feed Mode
Smart Wave Maker Random wave mode constant wave mode Feed mode ： The feeding switch should be turned on. After setting the feeding duration time, click "confirm". During the feeding period, the pump will stop working. MCP、MLW、MOW Series... -
Page 30: Timer Mode
Smart Wave Maker Feeding duration setting Timer mode： In the device control interface, press the Timer icon of mode setting for 2 seconds to enter the Timer setting. MCP、MLW、MOW Series... - Page 31 Smart Wave Maker ④ Time period switch button ① Adjust the time slider ③ End time Start time ② ⑤ Click into wave making mode selection and parameter setting Double-click the blank area of the ring to add the plan time period or use the switch button to switch to the blank area of the ring to add the plan time automatically.
- Page 32 Smart Wave Maker Parameter setting Mode selection and setting Time period setting Linkage mode setting ： In the device control interface, click "Linkage" button to enter linkage settings. In the linkage mode, two or more wave pumps are required in a group. One pump is set as the main control and the other slave control.
- Page 33 Smart Wave Maker Main control function Settings: Manual setting page Timing setting page MCP、MLW、MOW Series...
- Page 34 Smart Wave Maker Slave control function Settings: Slave control can only set the flow and the speed, the function is determined by the main control. MCP、MLW、MOW Series...
- Page 35 Smart Wave Maker 4. Pump Management On the device’s main page, tap on upper right-hand side to device management page. User can calibration time,rename, delete device. To add back the device, user need to start configuration again. 1. The factory time of the equipment may not be accurate, so the first time to use the AP direct connection mode of the mobile phone needs to set the calibration time (top the set time).
- Page 36 Smart Wave Maker 2. Users can also change the name of the pump to facilitate management. Rename 3.You can also delete the current pump, but when you want to add another pump, you should reconfigure the network to add the pump.Reset the Wi-Fi module if necessary.
- Page 37 Smart Wave Maker Delete Device 5. Trouble shooting tips When the Wi-Fi module doesn’t communicate with the driver, the connection failure will be indicated. LED Error code and APP Error description: When the controller work abnormal, the controller will show the Error code and warning flashing, when enter the APP will pop-up the mention box.
- Page 38 Smart Wave Maker APP mention and error code: Er01: Controller over current;Abnormal Working current; Check if the pump short of voltage or the controller broken. Er02: Controller over heat; Controller overheating; Check whether the controller exposed to the sunshine or in high temperature environment.
- Page 39 Smart Wave Maker IX. Maintance 1. Clean the controller regular to ensure good performance. 2. Clean the controller surface with dry cloth if there is any water to prevent water inflow into controller. 3. Remove the waste in the pump by rotating the basket in anti clockwise to open and lock in clockwise direction.
- Page 40 Jebao Co.,Ltd. Add：Tongmao Industrial Park, Xiaolan Town, Zhongshan, Guangdong, China. Tel：+86-760-28136708, 28136720 E-mail：info@jebao.com Website: http://www.jebao.com...