Table of Contents
Advertisement
Wi-Fi DOSING PUMP 3.4
USER'S MANUAL
WARNING：
● Only for indoor use. Position to avoid moisture ingress and
splashing. Water damage will void warranty.
● Do not use with corrosive liquids or liquids that will easily
crystallize.
● Before use, please must make full of the inlet & outlet hose
with liquid via manual mode, and calibrate the flow rate of each
pump. To ensure the precision on the work process.
● Do not disassemble the product, in case of the damage if not
professional or not instruct by professional.
Advertisement
Table of Contents
Related Manuals for Jebao DOSER 3.4
Summary of Contents for Jebao DOSER 3.4
- Page 1 Wi-Fi DOSING PUMP 3.4 USER’S MANUAL WARNING： ● Only for indoor use. Position to avoid moisture ingress and splashing. Water damage will void warranty. ● Do not use with corrosive liquids or liquids that will easily crystallize. ● Before use, please must make full of the inlet & outlet hose with liquid via manual mode, and calibrate the flow rate of each pump.
- Page 2 Ⅰ．Introduction Jebao Wi-Fi dosing pump is a modern product which enables to add different kinds of nutrition liquids in certain time and portion automatically. Before operating correctly , please read the manual carefully. Pump Features： ●Wi-Fi +Manual Control Function ●Automatic dosing in high precision ●Mini Size, Elegant appearance...
- Page 3 Ⅱ.Wi-Fi Control Operations Wi-Fi button Wi-Fi indication light Wi-Fi Indication Light and Wi-Fi Button Instruction ●Wi-Fi Indication Light A. Wi-Fi indication light is flashing in green and red while the Pump is on Wi-Fi configuration mode. B. Wi-Fi indication light is flashing in green while the Pump is ever connected to Wi-Fi but not connected to the router yet.
- Page 4 the cloud server. D. Wi-Fi indication light is red when the Pump is connected to the router but not connected to the cloud server. E. Wi-Fi indication light is flashing in red when Wi-Fi is reset. ●Wi-Fi Button Instruction A. Press Wi-Fi button for about 5 seconds and the Wi-Fi indication light starts flashing in green and red.
- Page 5 APP Download and Instruction 2． 2.1 Download The APP, Jebao Aqua, is available in App Store for Apple users and Google Play for Android system users. User can search Jebao Aqua in either App Store or Google Play to download the application.
- Page 6 Switch registration method ① Open Jebao Aqua App and tap "Register". Switch to email registration, fill in the information, and tap ② "Register", go back, enter your account number and password to log in. 2.2.2 Reset Password Tap "Forget Password" on the login page. On the Forget Password...
- Page 7 then enter your mailbox ，sign in to the App after resetting your password. 2.3 App Instructions 2.3.1. Main page Add new devices. Add new devices. Go to My Groups. Go to Settings.
- Page 8 2.3.2 Add new pump Tap My Devices. Tap “Add Now” or the” +” sign on the upper right-hand side to add your devices. Choose Dosing Pump Before connecting your pump to Wi-Fi, please make sure your pump is on connection status – the Wi-Fi Indication Light is flashing in green and red.
- Page 9 Choose the network you want to connect to and enter the correct password. Make sure you enter the password correct. Otherwise you need to start over again. Connecting to network Enter Wi-Fi password Select the device you want to add and tap Confirm to Add. Choose the pump you want to add.
- Page 10 2. It’s recommended that you have the pump, mobile device and router in close proximity when connecting the pump to Wi-Fi. 3. After connection completion, the Wi-Fi indication light is green. 2.3.3 Pump Control After adding the pump successfully, press the icon of the pump for 2 seconds to the pump control page.
- Page 11 Tap the channel power button, then the channel current status is on and the channel is working. Tap the channel power button again, then the channel current status will change to be off and the channel will stop working. Channel power button When the channel is in the manual mode and back to the pump control page, the manual icon is lit next to the channel.
- Page 12 Manual Mode icon is lit Liquid Flow Rate Calibration: Tap the top right corner of the pump control page. And tap the “Liquid flow rate calibration” to the setting page.
- Page 13 Enter the liquid volume, and select the calibration channel. Enter the liquid volume Select channel...
- Page 14 NOTE: For increasing the dosing precision, please refer to the actual dosing liquid volume for calibration. The calibration liquid volumes can be set to 10,20,30,40,50,60,70,80,90,100 (ml), and the calibration duration will be stored in the memory. The closer the calibration volume is to the actual dosing liquid volume, the more accurate the actual dosing liquid volume will be.
- Page 15 When the cylinder liquid is 20ml, tap the “Start calibration” switch to be off, then the channel 1 calibration stops. Tap to stop The calibration duration is shown. And the channel 1 calibration completes. Other channel calibration is the same. NOTE: Please keep the pump on the horizontal plane either during calibration or use, for increasing the precision.
- Page 16 Set Timer Mode Press and hold the channel icon to the setting page Set the Interval time. The Interval time can be chosen from 0 to 30 days. 0 means no interval. Tap Save to save. NOTE: When the device power is off, the interval time information will not be got.
- Page 17 Set Interval time Save Set the Recharge and the Recharge time. Tap Save to save. Maximum 24 Recharge time can be set. NOTE: When the recharge is set to 0 at some recharge time, this recharge is invalid. The pump will not work even the recharge time is come.
- Page 18 Save Set Recharge and Recharge time Tap to back...
- Page 19 Back to the channel setting page. Tap the “Start Timer” switch to be on. The channel 1 Timer setting completes. Back to the pump control page, and the timer icon is lit next to the channel.
- Page 20 Timer Mode icon is lit Other channels timer mode settings are the same. 2.3.4 Rename and Delete User can rename the pump for easy device management. User can also remove the pump from APP. To add the pump back, user need to reconnect it to Wi-Fi network.
- Page 21 Rename Delete Device 2.3.5 Error Report...
- Page 22 When the pump functions abnormal, open the APP the error box will pop up and display in the error list. APP display explain Wi-Fi module is bad contact to Wi-Fi module with motherboard mainboard. The communication part communication failure is damaged. Ⅲ.
- Page 23 When the Wi-Fi connection is abnormal, user can manually control the liquid dosing. When the manual dosing button is pressed, the dosing indication light will be on and the pump body corresponding to the button will start working. When the manual dosing button is pressed again, the dosing indication light will be off and the pump body will stop working.
- Page 24 Jebao Co., Ltd. Add：Tongmao Industrial Park, Dongsheng, Zhongshan, Guangdong, China Tel：+86-760-28136708, 28136720 E-mail：info@jebao.com Website: http://www.jebao.com...