VARILITE ICON BACK SYSTEMS Installation Instructions Manual page 6

Use in a Motor Vehicle
For ICON™ Back System Tall and ICON™ Back System Deep
This seating system has been dynamically tested and meets requirements
of ANSI WC20/Vol 4 and conforms to ISO 16840-4 for the safe use of seating
devices for use in motor vehicles when used with a wheelchair base that
complies with performance requirements of ANSI WC19 or ISO 7176-19.
A surrogate wheelchair base and Hybrid III Midsize Male ATD were used in the
frontal impact test.
Any postural support devices and belts that have not been successfully tested
in accordance with ANSI/RESNA WC18 or WC19 should not be relied upon as an
occupant restraint in a vehicle.
Failure to use the appropriate equipment for restraint in a vehicle can result in
serious injury or death.
For additional information regarding the use of seating systems in motor
vehicles, refer to Safe Use in a Motor Vehicle provided with this system and at
www.varilite.com
Page 6
© 2013 Cascade Designs, Inc.
Installation Instructions
WARNING