Assembly And Mounting Steps - VARILITE ICON BACK SYSTEMS Installation Instructions Manual

Assembly and Mounting Steps

Adjustment may be necessary to complete the installation and accommodate the
width of the wheelchair, or for desired seat depth, angle and height.
The following steps must be done before the client is in the wheelchair:
1. Determine the optimal height of
the back on the wheelchair.
2. Attach Cane Brackets to each
wheelchair cane, ensuring that the
Holsters face each other and the
Slide Caps open rearward.
3. Align the two Cane Brackets so
they are parallel and level with
each other. Tighten Cane Bracket
Screws enough to hold the Cane
Brackets lightly in place.
4. Loosen the Slide Bracket Screws.
5. Insert the back so that the Slide
Brackets fit securely into the
Holsters.
6. Tighten the screws on the Cane
Brackets and Slide Brackets to 4.5 Newton Meters.
7. Slide left and right Slide Caps closed, towards the Shell.
Page 12
© 2013 Cascade Designs, Inc.
Installation Instructions
CANE BRACKET
ATTACHED
LOOSEN SLIDE
BRACKET SCREWS
HOLSTERS
FACING
EACH OTHER