Siemens ANT795-6MT Compact Operating Instructions page 44

Mounting
Option 2:
Hidden installation in a suspended ceiling
Note
Note that the suspended ceiling must be made of a material with a low
electromagnetic attenuation.
①
Nuts for the bracket
②
Washers for the brackets
③
Screws for the brackets on the antenna
④
Bracket
Follow the steps below to mount the antenna on a ceiling using brackets:
1. Drill holes for the brackets (6 mm diameter) in the suspended ceiling element and
insert the plugs in the holes.
2. Secure the brackets with screws, washers and nuts to the antenna as illustrated.
The maximum tightening torque is 12 Nm.
3. Secure the brackets mounted on the antenna to the wall with screws.
4. Remove the protective caps from the QMA connectors of the antenna.
5. Connect the QMA/N-Connect cables to the antenna.
44
ANT795-6MT
A5E03484068-01, 09/2011