Honda CRF1100 Owner's Manual page 264

Removing & Installing Body Components
# Removal
1.
CRF1100A/D
Remove the bolts A and washers. using
the hex wrench provided on the
underside of the rear seat.
2.
CRF1100A2/A4/D2/D4
Remove the bolt B, bolts A and washers.
using the hex wrench provided on the
underside of the rear seat.
Remove the collar.
3.
Remove the skid plate by releasing its
4.
grommet from the prong.
258
Skid Plate
u
# Installation
1.
2.
P. 255
3.
2
4.
Torque: 26 N·m (2.7 kgf·m, 19 lbf·ft).
P. 255
5.
2
Torque: 12 N·m (1.2 kgf·m, 9 lbf·ft).
Install the skid plate in the reverse order
of removal.
Install the collar.
Install the washers onto the bolts A.
Tighten the bolts A.
CRF1100A2/A4/D2/D4
Tighten the bolt B.