Table of Contents
Advertisement
Keep the screws and sleeves in
Note:
a safe place.
Take the hoses out of the holders.
1.
Unscrew and remove all four
2.
transport brace screws.
Remove the sleeves. To do this,
remove the mains cable from the
holders.
Insert the covers. Lock the covers
3.
firmly in place by applying pressure
to the snap-in hooks.
Positioning and connecting
Hose and cable lengths
Connection on left side
or
Connection on right side
If the hose holders are used, the
Note:
possible hose lengths are reduced!
Available from dealer/customer
service:
Extension for Aqua-Stop or cold
■
water inlet hose (approx. 2.50 m).
Order no. WMZ 2380, WZ 10130,
CZ 11350, Z 7070X0.
Longer supply hose (approx.
■
2.20 m), for standard model.
en
39
Advertisement
Table of Contents
