Table of Contents
Advertisement
8. ADJUSTMENT OF WATER DISPENSE VALVE - See Fig. 6
1) Locate the two adjustment set screws on the bottom of the Water Valve as shown in
Fig. 6.
2) Using a 5/32" allen wrench, turn both set screws clockwise for a slower flow rate or
counterclockwise for a faster flow rate. See Fig. 6.
3) The flow rate can be determined by visual inspection.
Note: The flow rate will depend on the incoming water pressure. Adjustment
may be required in the event the unit is relocated.
FRONT VIEW
BOTTOM VIEW
Set Screws
Fig. 6
14
Advertisement
Table of Contents
