Cisco Catalyst 3030 Getting Started Manual page 10

Installing the Switch Module in the Server Chassis
Figure 4
Start the terminal emulation session so you will be able to see the output display
Step 2
from the power-on self-test (POST). The terminal-emulation software—a PC
application such as Hyperterminal or ProcommPlus—makes communication
between the switch and your PC or terminal possible.
Configure the baud rate and character format of the PC or terminal to match these
console port default characteristics:
•
•
•
•
•
Go to
Step 3
the switch module.
Cisco Catalyst Blade Switch 3030 Getting Started Guide
1-10
Connecting through the Switch Module Console Port
16 x
15 x
12 x
14 x
11 x
13 x
Co ns ol e
16 x
15 x
14 x
13 x
12 x
11 x
CO N
9600 baud
8 data bits
1 stop bit
No parity
None (flow control)
"Waiting for POST to Complete" section on page 1-13
Cisco Catalyst Blade Switch 3030 Getting Started Guide
to finish configuring
78-17052-01