Reverse Door - Jocel JCV-80 Instruction Manual

Reverse Door

TooI required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.

Ensure the unit is unplugged and empty.

To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.

All parts removed must be saved to do the reinstallation of the door.

Do not lay the unit flat as this may damage the coolant system.

It' s better that $ people handl e the unit during assem bly.
1. &emove two screws at rear side of top cover.
$. &emove top cover and thermostat knob, then place it aside.
3. (nscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
). (nscrew bottom hinge. Then remove the ad*ustable feet from both
side.
12
unscrew