Advertisement

Quick Links

Operator manual
Maredo® GT 190 REV03
Fraze-Groomer
Serial number:
IMPORTANT: The required (hydraulic/ electric) power to drive the GT190
Fraze-Groomer heads depends on the working depth, soil conditions,
working speed etc. The ambient temperature and the greensmower's
condition determine the available power of the greensmower.
Fraze-Groomer users should check the greens mower during work and act
to prevent overloading at any time.
MAREDO DOES NOT TAKE ANY LIABILITY FOR GREENSMOWER
DAMAGES
Note: For a safe operation it is essential, that the operator
reads and understands this manual of the Maredo machine
MAREDO BV, RIJKSSTRAATWEG 16, 3956 CR LEERSUM, THE NETHERLANDS
WWW.MAREDO-BV.COM
ENG 1841
1

Advertisement

Table of Contents
loading

Summary of Contents for MAREDO GT 190

  • Page 1 MAREDO DOES NOT TAKE ANY LIABILITY FOR GREENSMOWER DAMAGES Note: For a safe operation it is essential, that the operator reads and understands this manual of the Maredo machine MAREDO BV, RIJKSSTRAATWEG 16, 3956 CR LEERSUM, THE NETHERLANDS WWW.MAREDO-BV.COM ENG 1841...
  • Page 2: Safety Instructions

    7. Never overload the MAREDO. 8. Check the MAREDO minimal once a week and to make sure there are no loose bolts and nuts. Check for damages and repair them.
  • Page 3: Technical Specifications

    2.0 Introduction Congratulations on the purchase of your MAREDO®. To ensure a safe and long lasting operation of the MAREDO machine, you and anyone using the machine, must read and understand this operator-manual. Make ensure to understand and practice the safety rules as described in this manual.
  • Page 4 Instructions 1 Never use the machine under wet conditions. The material may clog. 2. Clean the GT190 with air or low-pressure water regularly. Never use high pressurized water or heated water. 3. Be careful when dropping the units on a hard (concrete) surface. Put protection underneath to protect the blades against damages.
  • Page 5: Maintenance

    Jacobsen, John Deere, Baroness or Toro 3400 Triflex series, the Maredo collecting box is attached to the GT190 with the standard Maredo connection. The heads of the Allen bolts in the collecting box fit exactly in the GT190’s support brackets.
  • Page 6: First Installation

    Please find mounting instructions in the attached instruction sheet or digital on www.maredo-bv.com/support In some occasions a right-hand (RH) drive will have to be changed into a left hand (LH) drive.

Table of Contents