Download Print this page

Maintenance - Omron CM2 Instructions For Use

Medium cuff

Advertisement

2.

Maintenance

Please report to the manufacturer and the competent authority of the Member State in which
you are established about any serious incident that has occurred in relation to this device.
2. Position the arm correctly.
1) The air tube should run down the inside of your
2)
to 2 cm above your elbow.
3)
marker (arrow under tube) is centered on the
middle of your inner arm and points down the
inside of the arm.
1 – 2 cm
your elbow.
3.
fabric fastener FIRMLY.
Hints
roll up your sleeve if it is too tight.
height). If necessary use a pillow or cushion.
• Use a soft and dry cloth, or a soft and moistened
• Do not use petrol, thinners of similar solvents to
humidity, direct sunlight, dust or corrosive vapours.
EN
3

Advertisement

loading