exhart 19965-RS Assembly Instructions

Solar rain gauge garden stake

Step 1:

Attach stake base (B) to top pole (A) by screwing it to the right until it is firmly tightened.

Step 2:

Place rain gauge (C) on top pole (A) (the result of step 1) by inserting it through the opening. When everything is

assembled, insert stake base firmly into the ground.

Note:

Product (Top Pole) will vary depending on the item purchased.

Top Pole

Stake Base

19965-RS

Rain Gauge

Table of Contents

Need help?

Do you have a question about the 19965-RS and is the answer not in the manual?

Page 1 19965-RS Note: Product (Top Pole) will vary depending on the item purchased. Top Pole Stake Base Rain Gauge Step 1: Attach stake base (B) to top pole (A) by screwing it to the right until it is firmly tightened. Step 2: Place rain gauge (C) on top pole (A) (the result of step 1) by inserting it through the opening.
Page 2 Ni-MH FOR DECORATIVE USE IN THE GARDEN. NOT TO BE GIVEN TO CHILDREN AS TOY. © 2020 Exhart - Chatsworth, CA 91311. Made in China / Fabrique en Chine. All Rights Reserved. For help please call 1-800-775-5503 | support@exhart.com exhart.com...