2.1.7 Control Box Section
The control box (Figure 2-6) includes the manual
operation switches; circuit breaker (CB-1); compressor,
fan and heater contactors; control power transformer;
fuses; key pad; display module; current sensor module;
controller module and the communications interface
module.
1
21
20
1.
Compressor Contactor
2.
Heater Contactor
3.
Display Module
4.
Communications Interface Module
5.
Controller/DataCORDER Module (Controller)
6.
Key Pad
7.
Emergency Defrost Light
8.
Start-Stop Switch
9.
Remote Monitoring Receptacle
10.
Manual Defrost Switch
11.
Condenser Fan Switch
T-296
Downloaded from
ManualsNet.com
2
19
18
17
16
Figure 2-6 Control Box Section
search engine
2.1.8 Communications Interface Module
The communications interface module is a slave
module which allow communication with a master
central monitoring station. The module will respond to
communication and return information over the main
power line. Refer to the master system technical manual
for further information.
3
15
14
13
12
12.
Controller Battery Pack
13.
Interrogator Connector (Box Location)
14.
Control Transformer
15.
Evaporator Fan Contactor - E1
16.
Evaporator Fan Contactor - S1
17.
Evaporator Fan Contactor - S2 or EF
18.
Evaporator Fan Contactor - E2 or ES
19.
Condenser Fan Contactor
20.
Circuit Breaker -- 460V
21.
Current Sensor Module
2-6
5
4
6
11
10
9
8
7