System; User; Siren - Honeywell Friedland GlobalGuard Operating Manual

2-6-5. System

You can configure the following 5 system related
settings here:
1.

User

2.

Siren

3. Time
4. Control Panel
5. Spectra Lighting Controller
Details on each setting will be covered in the following
section.
2-6-5-1. User
You can maintain various types of user information (i.e.
user name and PIN code) here.
For instructions on other detailed settings, please refer
to the hardware instruction manual for the Control
Panel
Note:
1. The PIN code for Admin may not be
left blank. This restriction does not
apply to other users.
2. To avoid potential confusion and
difficulty in user management,
identical PIN codes shared by two or
more users will not be accepted.
3. PIN codes must 4 digits in length.
4. When a user does not have a valid
PIN code or a remote, they will be
shown as "Disable" on the list to the
left.
:
If a user is in possession of a remote, a
remote control icon will appear next to the user in the
edit window.
2-6-5-2. Siren
You can configure relevant Siren settings here.
For instruction on other detailed settings, please refer
to the hardware instruction manual for the Control
Panel
CUSTOMER HELPLINE
Most issues can be solved over the phone in a few minutes.
Please contact our Helpline Team on the number below for any
installation and general advice regarding our products:
0844 736 9149
Lines open 9.00am to 5.00pm, Monday to Friday.
Calls charged at service providers national rate.
20