Beep Continuity Test; Capacitance Measurement; Temperature Measurement - Prokit's Industries Pro's Kit MT-1280D User Manual

3.2.6 Beep Continuity Test:

To avoid any electric shock and/or damage to the meter, do
not attempt a beep continuity test before cutting off the power
of the circuit and discharging all the electricity.

Turn the switch to the position

Press the "Select" to switch to

Connect the black test lead and red test lead to COM socket and V
socket respectively.

Use the test leads to measure the resistance of the circuit. If the
value is less than 50Ω±30Ω, the indication will flash & the beeper will
alarm.

3.2.7 Capacitance Measurement:

To avoid any electric shock and/or damage to the meter, do not
attempt capacitance measurement before cutting off the power of
the circuit and discharging all the electricity.

Turn the switch to the position 60mF.

Connect the black test lead and red test lead to COM socket and V
socket respectively.

Use test lead to measure the capacitance.

Read the capacitance measured value on LCD screen.
Note:

While measuring the large capacitance, please hold it for a while for
stabilizing the reading.

To avoid damage to the meter, the measurement of a capacitor with
polarities requires matching the relevant polarity.

3.2.8 Temperature Measurement:

Turn the switch to the position ˚C/˚F, press select to choose the unit.


Connect the black and red temperature sensing probe to COM
socket and V socket respectively.

Use sensing probe to measure the temperature.

Read the temperature measured value on LCD screen.
Note:

The maximum measuring temperature for the K-type thermocouple
dispatched at random is 250˚C, and its instant measuring value can
.
.
10