Remote Control - Tactacam 6.0 Instruction Manual

REMOTE CONTROL

REMOTE CONTROL
The Tactacam 6.0 is compatible with the Tactacam remote. Please see the Tactacam
support page for more remote and operation instructions.
1. Turn on both your Tactacam Remote and 6.0
2. On your 6.0, swipe down on the LCD screen, click "RF Remote"
3. Click "Connect"
NOTE: You will see the remote connection number increase by 1 number. If this is
the first camera synced a 1 will be displayed on the remote. After initial pairing, your
remote can control up to (5) Tactacam remote compatible cameras with one button.
Functions include Power ON Auto Record / PAUSE/ OFF and when not recording
conserves batteries with the Auto Power off feature. All cameras and Remote will
power down after 3 min when not recording. But don't worry they all will power back on
just as fast with a push of the Tactacam remote button. Tactacam Remote Technology
gives you the feed back you need, all on an LCD screen: Number of connected cameras,
Record length, Remote Battery life and the Green LED indicates Recording, Pause/On
and Off Tactacam Remote has been optimized at 100 feet giving you the distance and
control over your cameras. NOTE: Tactacam Remote is only compatible with Tactacam
compatible cameras.
9