Quick Change Modes - Tactacam 6.0 Instruction Manual

Table of Contents

Advertisement

"QUICK CHANGE" VIDEO MODES
The camera has three pre-set video modes:
• Green = Standard recording, best for first time use, general recording and low light
recording.
• Blue = Zoom mode, to get you closer to the subject.
• Light Blue = Slow motion, records at 120fps provides smooth playback of your
shot placement. Best results are with lighted arrow nock or tracer round ammo.
CHANGING MODES
To change modes, simply swipe right and/or left on the screen until you reach the
desired mode. Tap on the screen to select it.
BLACKOUT MODE
Activate blackout mode in the Tactacam Connect app camera settings by turning
black out mode on. Then enter Blackout mode by pressing the MODE button when the
camera is recording.
NOTE: You can only enter and exit the Blackout mode when the camera is recording.
When in Blackout mode your camera functions will remain the same without visible
lights on the camera. You will only feel the camera vibrate. (2 vibrations = recording
and 1 vibration = pause). If at any time you get confused just push and hold the rec/
power button for 5 seconds and the camera will power off.
NOTE: When using Blackout mode, periodically confirm you are recording to avoid
mishaps. The battery indicator light will blink to inform you that the battery has less
then 10% life remaining.

QUICK CHANGE MODES

7

Advertisement

Table of Contents
loading

Table of Contents