Table of Contents
Advertisement
5.39.5 Set Maximum Host Interface Sector Time
Sector Count
Typical PIO Mode Host Interface Sector Time (7:0)
LBA Low
Typical PIO Mode Host Interface Sector Time (15:8)
LBA Mid
Typical DMA Mode Host Interface Sector Time (7:0)
LBA High
Typical DMA Mode Host Interface Sector Time (15:8)
Subcommand code 43h allows the host to inform the device of a host interface rate limitation. The typical Host
Interface Sector Times have the same units as Identify Device word 96 for DMA and word 104 for PIO. A value of
zero indicates that the host interface shall be capable of transferring data at the maximum rate allowed by the
selected transfer mode. The Typical PIO Mode Host Interface Sector Time includes the host's interrupt service
time.
Deskstar 7K500 Hard Disk Drive Serial ATA Addendum
128
Advertisement
Table of Contents
