Advertisement
ISSUE
Hot plate not lighting
Flame is too high or too low
Pilot light not staying lit
Strong smell of gas in cooking
area
Cooking surface is heating up
slowly
Gas type of Unit needs to be
converted
If problems persist and the assigned solution does not remedy the issue, please call
Service Department or your
Troubleshooting
CAUSE
Main gas line is closed
Pilot light is not lit
Cause unknown
Adjustment knob is turned up or
down
Flame is too low
Pilot tube clogged
Main gas line leak
Carbon build up
Unit ships from the factory Natural
gas. Conversion from Natural Gas
to L.P. is possible for this unit
local service company.
CORE PRO
FOREMOST
EAST HANOVER
Adjust flame with control knob
Replace pilot tube. Call for service
Turn off main gas valve. DO NOT
LIGHT FLAME, ignite anything, or
turn/switch on anything electrical
Call fire department if needed and
Ensure that the burners are kept
clean and free from carbon build
Contact an authorized servicer.
Do not attempt conversion on
NJ 07936
9
SOLUTION
Open valve
Ignite pilot light
Call for service
Adjust pilot light flame height
call for service
up/ debris
your own
Advertisement
