Advertisement
Quick Links
TECHNICAL
TECHNICAL
T
T
E
L
E
E
L
E
Entry Phones with Built-In Proximity Card Reader
"Brushed Stainless Steel"
(similar to brushed nickel) Shown with
optional VE-5x5 surface mount box
and VE-LIGHT kit (not included)
The E-70 Series entry phones are compact, weather and vandal resistant speaker phones designed to provide two-way handsfree
audio communication. The E-70 also includes a built-in 125KHz HID compatible proximity card reader. The card reader outputs indus-
try standard 26-bit Wiegand data, allowing it to be used with a Viking ES-1 door controller or any controller compatible with 26-bit
Wiegand format. The E-70's compact size allows it to be mounted in a standard double gang electrical box. The E-70 is available in
five different attractive finishes to match your door hardware, light fixtures, etc. Replacement E-70 faceplates (PNL70) can be pur-
chased separately and are available in all five standard finishes. The E-70 entry phones can share a single phone line with house or
small business telephones when used with a Viking model C-200, C-250 or C-2000B Entry Phone controller. The E-70 entry phones
can also be connected to an unused analog station port (programmed for ring down) on a phone system or connected directly to a
telephone line when used with a Viking model K-1900-5 auto dialer. The E-70 features a built-in proximity card reader, microphone
and speaker volume controls, selectable auto answer for monitoring and intelligent call progress detection for automatic hang-up
when the call is completed. For outdoor environments or corrosive atmospheres, the E-70 is available with Enhanced Weather
Protection (EWP), see DOD# 859.
F
e
a
t
u
r
e
s
F
e
a
t
u
r
e
s
• Built-in 125KHz HID compatible 26-bit Wiegand proximity card reader
with LED and beep card read confirmation and EWP board protection
• Audio and video transmission on one CAT5E cable (see page 5)
• Compact size: Front panel is the size of a typical double gang mid-
size wall plate
• Mounting: Flush mounts in a double gang electrical box (2.25"
deep x 3.7" wide x 2.84" tall minimum) or surface mounts in a Viking
model VE-5x5 (not included, see DOD# 424) for mounting to a wall,
post or VE-GNP Gooseneck Pedestal (EWP recommended)
• Available in 5 standard faceplate finishes: Brushed Stainless Steel,
Oil Rubbed Bronze, Polished Brass, Satin Black and Satin White
• PNL-70 faceplates: Replacement faceplates with matching screws
available in all five standard finishes
• Features: Mylar speaker, faceplate gasket, mic and speaker gasket,
internally sealed (IP67) push button switch, self draining mic mount
and UV stable weather resistant powder coating (excludes E-70-SS
stainless steel faceplate)
• Vandal Resistant Features: 16 gauge polished brass or 18 gauge
stainless steel faceplate, stainless steel push button, stainless
steel speaker screen, scratch resistant powder coating, hex drive
mounting screws
• Optional Enhanced Weather Protection (EWP, recommended for
outdoor applications) Features: Urethane potted circuit board,
internally sealed POTS and dip switches, potted microphone and
push-button switch, etc.
• Blue LED helps locate the push button, indicate ringing and off-hook
• Programmable Intelligent call progress detection for automatic
hang-up on CPC, silence, busy signal, or time out
• VE-LIGHT: Optional faceplate light kit for use with the VE-5x5
S
S
C
O
M
O
L
U
T
I
O
N
S
C
O
M
O
L
U
T
I
O
N
S
E-70-SS
E-70-BN
"Oil Rubbed Bronze"
(satin dark brown powder
paint with fine copper metallic)
P
r
a
c
P
r
a
c
2
1
C
2
1
C
F
O
R
T
H
E
S
T
F
O
R
T
H
E
S
T
E-70-PB
"Polished Brass"
(with clear gloss powder
paint to prevent tarnishing)
A
p
p
l
i
A
p
p
l
• Door or gate communication, business delivery entrances
• Use with a Viking C-200 or C-250 to control one E-70 on a single
phone line
• Use with a Viking C-2000B to control 1 to 4 E-70's and door/gate
control on a single phone line
• Use with a Viking ES-1 for proximity card reader door control
• Provide unique front and back door chimes and paging when used
with a Viking SLP-1 or SLP-4 and C-2000B
• Residential, commercial and industrial door security
• Use with a Viking K-1900-5 for automatic speed dialing on tele-
phone lines or analog PABX/KSU station ports
• Use on any analog PABX station port with programmable ringdown
capability
h
t
t
p
h
t
t
S
p
e
c
S
p
e
c
Dimensions: Faceplate: 123.8mm x 125.4mm x 4.3mm (4.875" x 4.938" x 0.17"), Phone:
72mm x 46mm x 42mm (2.84" x 1.8" x 1.65")
Shipping Weight: 0.55 kg (1.2 lbs)
Operating Temperature: -34° C to 65° C (-30° F to 150° F)
Connections: (2) gel-filled butt connectors (3M Scotchlok UR2)
(See page 2 for complete specifications)
E-70 Series
E-70 Series
Double Gang Entry
Phones with Built-In
t
i
c
e
t
i
c
e
Proximity Card Reader
E
N
T
U
R
Y
E
N
T
U
R
Y
E-70-WH
"Satin White"
(satin white powder paint)
c
a
t
i
o
n
s
i
c
a
t
i
o
n
s
P
h
o
n
e
.
.
.
P
h
o
n
e
.
.
.
i
n
f
o
@
v
i
k
i
n
g
e
l
i
n
f
o
@
v
i
k
i
n
g
e
l
:
/
/
w
w
w
.
v
i
k
i
n
g
e
l
p
:
/
/
w
w
w
.
v
i
k
i
n
g
e
l
i
f
i
c
a
t
i
o
n
s
i
f
i
c
a
t
i
o
n
s
June 17, 2009
E-70-BK
"Satin Black"
(fine texture satin black
powder paint)
7
1
5
.
3
8
6
.
8
8
6
1
7
1
5
.
3
8
6
.
8
8
6
1
e
c
t
r
o
n
i
c
s
.
c
o
m
e
c
t
r
o
n
i
c
s
.
c
o
m
e
c
t
r
o
n
i
c
s
.
c
o
m
e
c
t
r
o
n
i
c
s
.
c
o
m
Advertisement
Related Manuals for Viking E-70 Series
Summary of Contents for Viking E-70 Series
- Page 1 The E-70 also includes a built-in 125KHz HID compatible proximity card reader. The card reader outputs indus- try standard 26-bit Wiegand data, allowing it to be used with a Viking ES-1 door controller or any controller compatible with 26-bit Wiegand format.
- Page 2 Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of one year from the date of purchase from any authorized Viking distributor or 18 months from the...
- Page 3 The E-70 is designed to be flush mounted into a standard double gang rough-in box with minimum inside dimensions of 2.25” deep x 3.65” wide x 2.84” tall. The E-70 can also be surface mounted in a Viking model VE-5x5 (not included, see Fax Back Doc 424).
-
Page 4: Surface Mounting
*** Note: Talk battery must be a minimum of 28V DC when using the speaker phone with a Viking Hot-Line Dialer. For more info, retrieve Fax Back Documents 833. **** Note: When installing a line powered phone on a low voltage and/or low loop current phone system exten- Need More Information on the PS-2R? Call (715) 386-4345 and select 512. -
Page 5: Adjusting Speaker Volume
F. Wiring the Proximity Card Reader Viking Model ES-1 (not included, see DOD# 193 for more information) VIKING MODEL ES-1 © 12V DC Back View of the E-70 Circuit Adapter VIKING Board Mounting Plate Included ELECTRONICS HUDSON, WI 54016 Doorstrike... - Page 6 C.O.line, turn the LED off to comply with FCC regulations. D. Accessing the Programming Mode The E-70 can be programmed from any Touch Tone phone using a telephone line, Viking model C-200, C-250 or C- 2000B Entry Phone Controller, analog PABX/KSU station or a Viking model DLE-200B Line Simulator.
- Page 7 If programmed to auto-answer (DIP switch 1 ON), the E-70 will also answer any incoming call. The E-70 proximity card reader operates completely independently of the E-70 phone board. When connected to a Viking ES-1 (or equivalent card reader controller) the red LED will light, indicating the card reader is powered. The LED will turn off and the transducer will beep indicating a card scan.
- Page 8 Analog Phone(s) Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes.