Using The My Text Password Function - Hitachi CP-X4 User Manual

OPTION menu (continued)
Item
SECURITY
(continued)
(continued on next page)
4.4 If you have forgotten your PASSWORD
4.4-1 Follow the procedure in 4.1-1 to display the Transition Detector on/off menu.
4.4-2 Select TURN OFF to display the ENTER
PASSWORD BOX (large). The 10 digit Inquiring
Code will be displayed inside the BOX.
4.4-3 Contact your dealer with the 10 digit Inquiring
Code. Your PASSWORD will be sent after your
user registration information is confirmed.

5. Using the MY TEXT PASSWORD function

This item allows you to display your own message (MY TEXT) on the START
UP screen and INPUT-INFORMATION-. It can be protected by a password to
prevent it from being overwritten.
5.1 Writing the MY TEXT
(1) Use the ▲/▼ buttons on the SECURITY menu
to select the MY TEXT WRITING menu and
press the ► button. The MY TEXT WRITING
dialog will be displayed.
(2) The current MY TEXT will be displayed on the first 3 lines. If not yet written,
the lines will be blank.
Use the ▲/▼/◄/► buttons and the ENTER or INPUT/ENTER button to select and
enter characters. The RESET button can be used to erase 1 character at a time.
Also if you move the cursor to DELETE or ALL CLEAR on screen and push the
ENTER or INPUT/ENTER button, 1 character or all characters will be erased. The
MY TEXT can be input up to 24 characters on each line.
(3) To change an already inserted character, press the
▲/▼ button to move the cursor to one of the first 3
lines, and use the ◄/► buttons to move the cursor
on the character to be changed.
After pressing the ENTER or INPUT/ENTER button,
the character is selected. Then, follow the same
procedure as described at the item (2) above.
(4) To finish entering text, move the cursor to the
SAVE on screen and press the ENTER or
INPUT/ENTER button. To revert to the previous
MY TEXT without saving changes, move the
cursor to the CANCEL on screen and press the
ENTER or INPUT/ENTER button.
• The MY TEXT WRITING function is available only when the MY TEXT
PASSWORD function is set to TURN OFF.
5.2 Displaying the MY TEXT
(1) Use the ▲/▼ buttons on the SECURITY menu
to select the MY TEXT DISPLAY menu and
press the ► button to display the MY TEXT
DISPLAY on/off menu.
(2) Use the ▲/▼ buttons on the MY TEXT DISPLAY
on/off menu to select on or off.
TURN ON ó TURN OFF
When it is set TURN ON, the MY TEXT will be
displayed on the START UP screen and the INPUT-
INFORMATION- when the INFORMATION on the
SERVICE menu is chosen.
• This function is available only when the MY TEXT
PASSWORD function is set to the TURN OFF.
Description
OPTION menu
ENTER PASSWORD BOX
(large)
49