Geometric Correction is only applicable in some models/countries/regions.
> Screen > Geometric Correction
1. Press
/
/
/
need to adjust.
2. Long press
/
/
/
/
/
buttons: precise adjustment of the projected image.
3. Press
button to save your adjustment, and you can select other points to adjust the image.
If you want to return the image position to the factory default, select Reset button on the screen.
Focus Adjustment
Press
> Screen > Focus Adjustment.
You can adjust the focus parameters by pressing the up and down buttons on the remote. The focus effect is
adjusted in real time according to the displayed background image card.
Note:
• This function is only applicable in some models/countries/regions.
Eye Protection
Note:
• In order to protect your eyes, do not look into the lens. The light output will be temporarily disabled after 5
seconds.
Press
> Screen > Eye Protection you can choose to enable this function on or off.
Accessibility and System
buttons on your remote to move focus, and press
buttons: quick adjustment of the projected image; Short press
/
35
button to choose a point you