Page 2
Conforms to EN716:2017+AC:2019 and BS 8509:2008+A1:2011 Tutti Frutti Direct Ltd. Unit 3, 1000 North Circular Road, London, UK, NW2 7JP t: + 44 (0) 208 368 5800 e: customerservice@tuttibambini.co.uk www.tuttibambini.com Roma Cot Bed 211059 IMPORTANT: RETAIN FOR FUTURE REFERENCE. READ CAREFULLY...
Page 3
• Damaged part number • A photo or video of the damaged part Tutti Bambini guarantee your product against faulty manufacutre for a period of 12 months from date of receipt of purchase. This does not affect your statutory rights www.tuttibambini.com...
Parts List back right front left back left front right Hardware List 10 pcs For back mattress support bar For triangle braces to convert Into bed 8 pcs 10 pcs M6x35mm Bolts 16 pcs For mattress slats only For fixed side rail M6x25mm Bolts For front mattress support bar...
Page 5
Assembling into cot Important note:First tighten all bolts by hand only, do not tighten all bolts with Allen Key until all parts have been fully assembled. C x 4 PCS 55mm D x 2 PCS 35mm F x 1 PCS Assemble the 2 ends with fixed rail Assemble back mattress support using 4 x C bolts...
Page 6
Assembling into cot C x 4 PCS 55mm F x 1 PCS Assemble fixed rail using 4 x C bolts IMPORTANT NOTE: The bottom mattress base position is the safest. You should always use the cot in this lowest position as soon as your baby is old enough to sit up www.tuttibambini.com...
Page 7
Assembling drawer A x 10 PCS B x 5 PCS Assemble bolts Assemble nuts B x 5 PCS Slide the drawer into the wooden channels Assemble nuts located at the bottom of the cot bed ends NOTE: Please slide the drawer in from the side of cot bed where the drawer runner is closer to the post.
Page 8
Assembling into bed D x 2 PCS D x 2 PCS 35mm 35mm Assemble back mattress support bar Assemble front mattress support bar using 2 x D bolts using 2 x D bolts D x 2 PCS D x 2 PCS 35mm 35mm C x 2 PCS...
Page 9
Assembling into bed E x16 PCS 25mm Assemble mattress base using 16 x E bolts Slide the drawer into the wooden channels located at the bottom of the cot bed ends www.tuttibambini.com...
Page 10
Assembling into a SOFA C x 4 PCS D x 2 PCS 55mm 35mm Assemble the 2 ends with fixed rail Assemble back mattress support using 4 x C bolts bar using 2 x D bolts D x 2 C x 2 C x 2 PCS 55mm D x 2 PCS...
Page 11
Assembling into a SOFA E x 16 PCS 25mm Assemble mattress base Slide the drawer into the wooden channels using 16 x E bolts located at the bottom of the cot bed ends www.tuttibambini.com...
7. The maxi mum height (i .e. upper surface) of any mattress fitted must not exceed safety mark engraved on the inside of the cot end. 8. We recommend the use of Tutti Bambini mattress for this cot bed or a minimum mattress measuring 70cms x 1 40cm.
Need help?
Do you have a question about the Roma 211059 and is the answer not in the manual?
Questions and answers