Do you have a question about the HQ-KZ006 and is the answer not in the manual?
Questions and answers
Richard Joseph Grace
May 8, 2025
I have a new Model R609. Came with the wrong Power supply Adapter. I received QHO132051000Ga2 does not fit. How do I get the correct one?
1 comments:
Richard Joseph Grace
May 10, 2025
@Richard Joseph Grace
Jackie Mitchell
March 27, 2025
Turn table not turning
1 comments:
Mr. Anderson
March 27, 2025
The Retrolife HQ-KZ006 turntable may not be turning because it is a manual turntable. It continues to spin until manually turned off or the tonearm is lifted and returned to its rest position. If it is not spinning at all, possible reasons could include the belt not being properly installed, the power not being connected, or the tonearm not being moved into position to start playback.
This answer is automatically generated
keith dexter
June 13, 2025
can"t get my turntable HQK006 to play records without skipping or getting stuck on the the same words
Introduction Thank you for purchasing Retrolife Belt-Driven Turntable System. This user manual contains important information about safety, usage and disposal. Use the product as described and keep this instruction for future reference.If you sell this turntable or pass it on, also give this manual to the new owner.
Page 3
This turntable is equipped with a factory-adjusted cartridge that's already fitted. Note: Instructions are provided in this manual for adjusting the cartridge in case that the cartridge is replaced at a later date with a different model. Turntable Platter and Belt Setup Method Removable Lid DC in jack What’s included in the box:...
Need help?
Do you have a question about the HQ-KZ006 and is the answer not in the manual?
Questions and answers
I have a new Model R609. Came with the wrong Power supply Adapter. I received QHO132051000Ga2 does not fit. How do I get the correct one?
@Richard Joseph Grace
Turn table not turning
The Retrolife HQ-KZ006 turntable may not be turning because it is a manual turntable. It continues to spin until manually turned off or the tonearm is lifted and returned to its rest position. If it is not spinning at all, possible reasons could include the belt not being properly installed, the power not being connected, or the tonearm not being moved into position to start playback.
This answer is automatically generated
can"t get my turntable HQK006 to play records without skipping or getting stuck on the the same words