Page 1
PROFESSIONAL TURNTABLE WITH USB DIRECT ENCODING TT-930E-BT-BTT USER MANUAL...
Page 2
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. THE CAUTION MARKING AND RATING LABEL ARE LOCATED AT THE BACK OF THE UNIT IMPORTANT SAFETY INSTRUCTIONS Read these instructions.
Page 3
consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instruction. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.
Page 4
LOCATION OF CONTROLS 1) Dust cover 2) Spindle adaptor 3) Alignment screw with rubber cover 4) Counter weight 5) Pitch adjust 6) Cueing lever 7) Turntable speed selector 8) Tone-arm lock 9) Transit screw 10) Bluetooth transmit function button 11) Record TS (Track Separation) button 12) Record button 13) Record LED indicator 14) Play / Pause / Stop button...
Page 5
Precautions for use Installation Unpack all parts and remove protective material. Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made. Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.
Page 6
5. Your system is now ready to operate. Please refer to the Operations section of this Manual for details. Line out connection You can connect the system to your own hi-fi system by connecting the line out socket (27) to the auxiliary input socket with a RCA cable.
Page 7
Tone arm stopping position alignment The position of the tone arm complete playback and return to the rest station can be adjusted at the alignment screw (3) as follow:- Before starting the alignment, please take out the hole covering rubber:- a) If the system cannot complete the playback of record and return earlier, use a cross head screw driver and turning the alignment screw (3) inside the hole clockwise, the stopping and eject position of the tone arm will move more inward to the center of the record for playback completion.
Page 8
Folder up control 1. Press Folder button (26), the folder no. will goes up 2. Press Skip up or Skip down button (18) to select track 3. When the desired track is being selected, press the Play/Pause button (14) to start playback. Remark MP3 track format requirement: MP3 bit rate : 32 kbps~256 kbps The system can detect and read the file under MP3 and format only though the USB port...
Page 9
2. Turn on the Bluetooth function of the device you want to link to and enable the search or scan function to find the system. 3. Select “Retrolife” from the device list when it appears on your device screen. 4. After successfully pairing the unit with your Bluetooth device, The Bluetooth LED indicator (23) will stop flashing and remain lit.
Page 10
A) Encode from a Record 1) Press the Power button (16) once to turn on the unit. Then press the Function button (17) repeatedly until the Phono LED indicator (21) is light up in Red color meaning it’s in Phono mode. 2) Insert a USB pen drive into the USB port and press the Record button (12).
Need help?
Do you have a question about the TT-930E-BT-BTT and is the answer not in the manual?
Questions and answers