Advertisement
Available languages
Available languages
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is suitable for sawing wood, plastic, metal
and building materials on a firm surface. It is suitable for
straight and curved cuts. When using designated suitable bi-
metal saw blades, flush cutting is also possible. The saw
blade recommendations are to be observed.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
a)
(1) Saw blade
(2) Adjustable base plate
(3) Locking sleeve for saw blade
(4) Saw blade receptacle
(5) Hex key
(6) Utility hook
(7) Lock-off function for on/off switch
(8) On/off switch
(9) Orbital action adjusting lever
(10) Rechargeable Battery release button
a)
(11) Rechargeable battery
(12) Handle (insulated gripping surface)
(13) Base plate screw
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Reciprocating saw
Article number
Rated voltage
A)
No-load stroke rate n₀
Tool holder
Stroke
Max. cutting depth
– in wood
Bosch Power Tools
Reciprocating saw
– in steel (unalloyed)
– pipe diameter
Weight according to EPTA-Pro-
cedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperature
during operation
storage
Compatible rechargeable bat-
teries
Recommended rechargeable
batteries for maximum perform-
ance
Recommended chargers
A) Measured at 20–25 °C with rechargeable battery ProCORE18V
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C
Rechargeable battery
Bosch sells some cordless power tools without a re-
chargeable battery. You can tell whether a rechargeable bat-
tery is included with the power tool by looking at the pack-
aging.
Charging the battery
Use only the chargers listed in the technical data. Only
u
these chargers are matched to the lithium-ion battery of
your power tool.
Note: Lithium-ion rechargeable batteries are supplied par-
tially charged according to international transport regula-
a)
tions. To ensure full rechargeable battery capacity, fully
charge the rechargeable battery before using your tool for
the first time.
Inserting the Battery
Push the charged battery into the battery holder until it
clicks into place.
Removing the Battery
GSA 185‑LI
To remove the rechargeable battery, press the battery re-
3 601 FC0 0..
lease button and pull the battery out. Do not use force to do
this.
V=
18
The rechargeable battery has two locking levels to prevent
−1
min
0–2900
the battery from falling out if the battery release button is
SDS
pressed unintentionally. The rechargeable battery is held in
place by a spring when fitted in the power tool.
mm
28
mm
230
C)
and during
8.0Ah.
1 609 92A 758 | (08.04.2022)
English | 7
GSA 185‑LI
mm
20
mm
150
B)
kg
3.5–4.6
°C
0 to +35
°C
−20 to +50
GBA 18V...
ProCORE18V...
ProCORE18V...
≥ 5.5 Ah
GAL 18...
GAX 18...
GAL 36...
Advertisement
