Advertisement
Installation Instructions/Instrucciones de Instalación
1. Position the rough-in into the wall at the appropriate
distance. Make sure the rough-in is leveled horizontally
and vertically.
2. Secure rough-in using the mounting holes on the
rough-in.
3. Finish the wall around the plaster guards (Each hole
should be a circle with a max. diameter of 2 1/8").
4. Remove the plaster guards.
5. Insert the spout into the tap body, carefully screw in
to level and then fasten with screws. Do not pinch the
rubber o-rings.
6. Slide escutcheons over the spout and the control
handle.
7. Position the handle onto the mixer base and secure
the set screw.
How to Use
OPEN
HOT
COLD
CLOSE
LACAVA
4
Advertisement
