Table of Contents
Advertisement
Clock Setting
After connecting the unit to the power, the symbols " 0:00 " will be visible on the display.
1.
Press "
", the hour figures will flash.
2.
Rotate " K2 " to adjust the hour figures, (time should be within 0--23).
3.
Press "
", the minutes will flash.
4.
Rotate " K2 " to adjust the minutes setting, (time should be within 0--59).
5.
Press "
" to finish the clock settings. " : " will flash, and the time will be illuminated.
Note:
The clock is 24 hours. After power on, if not set, the clock will show " 0:00 ".
Function Setting
1.
Rotate " K1 " to choose the cooking function you require. The related symbol will illuminated.
2.
Rotate " K2 " to adjust the temperature.
3.
Press "
" to confirm the start of cooking.
4.
If step 2 is ignored, Press "
the default temperature will display on the LED.
NOTE:
1.
The step quantities for the adjustment time of the knobs are as follow:
0--0:30min: step 1 minute 0:30--9:00hour: step 5 minutes
2.
The step quantities for the adjustment of temperature is 5 C, and "
the temperature.
3.
Rotate " K1 " to adjust the cooking time when cooking begins. Then press "
If "
" not pressed within 3 seconds, the oven will revert back to the previous time to
continue cooking.
4.
Rotate" K2 " to adjust the temperature when cooking begins. The related indicator will be
illuminated. Then press"
revert back to the previous temperatrue to continue cooking.
Lamp Setting
1.
Rotate " K1 " to select the relevant function, then the corresponding icon will be on.
2.
Press "
" button to start, " 0:00 " and lamp icon"
P
I
02 9604 1226
E
OPERATION INSTRUCTIONS
" to confirm the start of cooking and the default time is 9 hours,
" to start cooking. If "
I
sales@danielaappliances.com.au
" not pressed in 3seconds, the oven will
" will light up, " : " will flash.
W
|
danielaappliances.com.au
" "
" can not adjust
" to confirm.
PAG E 7
Advertisement
Table of Contents
