Image Snap And Ship; Reread Delay - Honeywell N86 Series User Manual

Image Snap and Ship

Image Snap and Ship tells the engine to take a picture (rather than read a bar
code) when the trigger is pressed. Once the picture is snapped, it is shipped to
the host system as a jpeg file by default. To revert to bar code reading, you
must change to a different trigger mode (see Manual Trigger Modes beginning
on page 3-6).
Image Snap and Ship
Note: You must send a serial command for Manual Trigger Modes (see page
10-13) in order to use menu codes after using Image Snap and Ship.

Reread Delay

This sets the time period before the engine can read the same bar code a sec-
ond time. Setting a reread delay protects against accidental rereads of the
same bar code. Longer delays are effective in minimizing accidental rereads.
Use shorter delays in applications where repetitive bar code scanning is
required. Reread Delay only works in presentation modes. Default = Medium.
Short (500 ms)
* Medium (750 ms)
Long (1000 ms)
Extra Long (2000 ms)
3 - 8