Good Read Delay; User-Specified Good Read Delay; Manual Trigger Modes - Honeywell N86 Series User Manual

Good Read Delay

This sets the minimum amount of time before the engine can read another
bar code. Default = 0 ms (No Delay).
* No Delay
Medium Delay (1,000 ms)

User-Specified Good Read Delay

If you want to set your own length for the good read delay, scan the bar
code below, then set the delay (from 0-30,000 milliseconds) by scanning
digits from the inside back cover, then scanning Save.

Manual Trigger Modes

When in manual trigger mode, the scanner scans until a bar code is read, or
until the trigger is released. Two modes are available, Normal and Enhanced.
Normal mode offers good scan speed and the longest working ranges (depth of
field). Enhanced mode will give you the highest possible scan speed but
3 - 6
User-Specified Good Read Delay
Short Delay (500 ms)
Long Delay (1,500 ms)