Ensuring The Device Connected To Host Properly; Conclusion - e-con Systems See3CAM CU30 Getting Started Manual

See3CAM_CU30 Getting Started Manual 03-Feb-2015
Figure 10: Status LED indicating Camera streaming

6.2.4 Ensuring the device connected to Host properly

After the insertion of board to Host, you can confirm that See3CAM_CU30 is properly connected
to Host from Imaging Devices.
Go to Control Panel  Device Manager  See3CAM_CU30
Figure 11: Imaging Devices showing See3CAM_CU30 connected to Host

7 Conclusion

This document describes How to connect See3CAM_CU30 board to USB3.0 Host and how to get
it working.
www.e-consystems.com | Subject to change without notice Page 9 of 9