e-con Systems See3CAM CU30 Getting Started Manual page 8

See3CAM_CU30 Getting Started Manual 03-Feb-2015
Figure 8: Connecting USB3.0 Cable to Superspeed Port
After the insertion of USB3.0 Cable with USB3.0 connector on the board and USB Host, the LED
(D1) will glow in Red colour. This indicates that the board is powered ON.
Figure 9: Status LED indicating Board Powered ON
After selecting the See3CAM_CU30 device in e-CAMView application the D1 LED glows in Green
and Red colour. This indicates that the camera is in streaming condition.
www.e-consystems.com | Subject to change without notice Page 8 of 9