Connecting The Board To Host - e-con Systems See3CAM CU30 Getting Started Manual

See3CAM_CU30 Getting Started Manual 03-Feb-2015
Figure 5: USB3.0 cable inserted in USB3.0 connector

6.2.3 Connecting the board to Host

Identify a USB3.0 port. The port which has the below logo is USB3.0 Port.
Figure 6: SuperSpeed USB 3.0 Logo
The USB3.0 cable needs to be inserted to SuperSpeed USB3.0 port of PC or Laptop.
Figure 7: USB3.0 Cable – Host Side
www.e-consystems.com | Subject to change without notice Page 7 of 9