See3Cam_Cu30 To Pc Host Interconnecting Cable; Connecting The Board With Host; Identification Of Usb3.0 Connector; Insertion Of Usb3.0 Cable In Connector - e-con Systems See3CAM CU30 Getting Started Manual

See3CAM_CU30
The following sections describe the parts supplied in the kit.
1. See3CAM_CU30 boards
2. USB3.0 Cable

6.1 See3CAM_CU30 to PC Host interconnecting Cable

The USB3.0 A to micro-B type cable is used to connect See3CAM_CU30 camera board to the
PC will be supplied by e-con Systems.

6.2 Connecting the board with Host

Please follow the below steps to connect See3CAM_CU30 board with PC or Laptop.

6.2.1 Identification of USB3.0 Connector

The location of USB3.0 (CN1) connector on See3CAM_CU30 is shown in below figure

6.2.2 Insertion of USB3.0 Cable in Connector

The USB3.0 Cable provided by e-con Systems should be inserted with USB3.0 connector as
shown in below figure.
www.e-consystems.com
Getting Started Manual
Figure 3: USB3.0 Cable
Figure 4: Location of USB3.0 Connector
| Subject to change without notice
03-Feb-2015
Page 6 of 9