Table of Contents
Advertisement
Say one of the following commands:
2.
Tip: Make sure you wait for the 3 beeps before speaking.
Speak clearly at a normal volume, as if you were talking on a phone.
Call <Name or #>
•
Send <Message Type
•
and Name or #>
Go to <Menu Name>
•
Check <Status Item>
•
Contacts <Name>
•
Note: Speaking clearly, say the command that you want to use. If, after a few seconds, your device has not
recognized a command, it prompts you to repeat the command. If, after a few more seconds, your
device still has not recognized a command, it tells you "Sorry, no match found," and cancels Voice
Commands.
Lets you dial the device by saying any
name stored in your Contacts list, without
ever having to record, or "train" that
name. Voice Commands automatically
voice-activates all your contacts.
You can also dial any telephone number,
even if it is not stored in your Contacts
list, by saying the digits in the number.
Launches Helio MESSAGE application.
(For more information about the
MESSAGE application, refer to the Helio
MESSAGE User Guide.)
Lets you access the Voice Memo,
Calendar, and Contacts List features of
your device. (See "Voice Memo" on page
152, "Calendar" on page 134, and "Your
Contacts List" on page 51 for more
information.)
Lets you check your device's status (that
is, network coverage, signal strength,
battery, and much more in the same
report), messages, missed calls,
voicemail, battery, time and date, signal
strength, volume, and phone number.
Lets you look up and display contact
information for any name stored in your
Contacts list by saying the name. (See
"Finding a Contact" on page 56 for more
information.)
Voice Functions
PLAN 149
Advertisement
Table of Contents
