Table of Contents
Advertisement
• Memo
Enter information in these fields, as desired. (For more information, see
4.
"Adding a New Contact" on page 51.)
Reset
In standby mode, press the M
1.
(for CUSTOMIZE),
prompted to enter the password.
Note: The default password is '0000'.
Enter the password. The Device menu appears in the display.
2.
Press
3.
in the display:
• Delete Contacts — Deletes all entries from the
Contacts List, or resets all Number, Speed Dial, or Group
assignments in the Contacts List.
• Reset Defaults — Resets CUSTOMIZE settings to the
factory default values.
Caution!: Contact your Wireless Provider before using the Reset Defaults option.
Reset Defaults does not restore settings made by your Wireless Provider.
Use the Up and Down navigation keys to highlight the desired memory
4.
option, then press the
You are prompted to confirm the selected deletion or reset.
Use the Left and Right navigation keys to highlight No and press the
5.
key to cancel the deletion or reset.
Use the Left and Right navigation keys to highlight Yes and press the
key to confirm the deletion or reset.
Security
Use the Security menu to lock your device, set up emergency numbers, enable or
disable voice privacy, set restrictions, as well as other security options.
Phone Lock
Locking the device limits all outgoing calls except calls to 911 emergency. You can
lock the device manually during use, or set the device to lock automatically when it
90
ENU
(for Settings), and
for Reset. The following options appear
key to save your setting.
(left) soft key (
), then press
for Device. You're
Advertisement
Table of Contents
