Table of Contents
Advertisement
AV-36D503
AV-36D303
AV-36D203
BASIC OPERATION OF SERVICE MENU
1. TOOL OF SERVICE MENU OPERATION
Operate the SERVICE MENU with the REMOTE CONTROL UNIT.
2. SERVICE MENU ITEMS
With the SERVICE MENU, various adjustments can be made, and they are broadly classified in the following items of adjustments.
(1) V/C(S)･･･････ ･････････････ ････････････ ･VIDEO / CHROMA related circuit adjustment mode
(2) DEFLECTION(D) ･･･････ ･････････････ ･･･DEFLECTION related circuit adjustment mode
(3) SOUND(A) ･･･････ ･････････････ ･････････ SOUND related circuit adjustment mode
(4) OTHERS(F) ･･･････ ･････････････ ････････Whole system related items adjustment mode
(5) PIP(PIP)[Only for AV-36D503] ･･･････ ････ PIP related c ircuit adjustment mode
(6) 3L Y/C(LYC) ･･･････ ･････････････ ･･･････3 line YC s eparation related c ircuit adjustment mode
(7) LOW LIGHT ･･･････ ･････････････ ･･･････ White balance of "LOW LIGHT " adjustment mode
(8) HIGH LIGHT ･･･････ ･････････････ ･･･････White balance of "HIGH LIGHT" adjustment mode
(9) RF AFC ･･･････ ･････････････ ･･･････････ RF AFC related circuit adjustment mode
(10) VCO ･･･････ ･････････････ ････････････ ･･VCO related circuit adjustment mode
2
(11) I
C BUS ･･･････ ･････････････ ･･･････････ I
(12) SYSTEM(SYS) ･･･････ ･････････････ ･････This mode is used when s etting up the whole s ys tem.
3. BASIC OPERATION OF SERVICE MENU
(1) Ho w to enter SERVICE MENU
Press the SLEEP TIMER key and set the SLEEP TIMER for
[0 MIN].
Then press the DISPLAY key and the VIDEO STAT US key of the
remote control unit simultaneously, and the SERVICE MENU
screen will be displayed as shown below.
(2) Selection of SUB MENU SCREEN
In SERVICE MENU, press the CURSOR ▲ ▲ ▲ ▲ /▼ ▼ ▼ ▼ key to select any of
the SUB MENU items. (The letters of the selected items are
displayed in yellow)
If an item like to set up bec omes yellow, the CURSOR
will be pushed and it will go into the mode.
SERVICE MENU
1.V/C(S)
2.D EF(D)
3.SOUND(A)
4.OTHERS
5.PIP(PIP)
6.3L Y/C(LYC)
7.LOW LIGHT
8.HIGH LIGHT
9.RF AFC
1 0.VCO
11.I
2
C BUS
12.SYSTEM(SYS)
SELECT BY
OPERATE B Y
SERVICE MENU
CURSOR ▲/▼ key
Select 1.V/C(S) ～ 12.SYSTEM(SYS)
1.V/C(S)
2.DEF (D)
2
11.I
C BUS
12.SYSTEM(SYS)
16
2
C bus related circuit adjustment mode [Fixed on]
EXIT
EXIT BY
CURSOR
Go into eac h SUB MENU
KEY ASSIGNMENT OF REMOTE CONTROL UNIT
①
Setting for "0 min"
②
Simultaneously push
/
key
③
Go into the item
④
Setting the value
Although this illus tration of remote c ontrol unit is written about
RM-C251 (AV-36D503), it can use for operating RM-C252 (AV-
36D303, 203) as same key assignment.
/
key
No. 51948
③, ④
Select the item
VIDEO/C HROMA
DEFLECTION
SOUND
EXIT
Advertisement
Table of Contents
