Table of Contents
Advertisement
DISASSEMBLY
Flowchart
• Remove each part following the flow below.
• Reassemble the removed parts in the reverse order.
• Read "SAFETY PRECAUTIONS" before reassembling the removed parts.
• If wire bundles are removed or moved during adjustment or part replacement, reshape the wires after completing the work. Failure to shape the wires correctly may cause problems such as noise.
• See "EXPLODED VIEW"
and "EXPLODED VIEW"
TOP PCB
Ref. No. of EXPLODED VIEW : C 2
MIC PCB
Ref. No. of EXPLODED VIEW : C 3
REAR GRILLE ASSY
FRONT GRILLE ASSY
TOP ASSY
DISASSEMBLY
2. TOP ASSY
SUB WIRE PCB
LED GVA AVS PCB
Woofer
Tweeter
GRILL
DISASSEMBLY
1. GRILL
and "EXPLODED VIEW"
Ref. No. of EXPLODED VIEW : P 8
Ref. No. of EXPLODED VIEW : P 56
FRONT ASSY
DISASSEMBLY
4. FRONT ASSY
and "EXPLODED VIEW"
Ref. No. of EXPLODED VIEW : C 8
Ref. No. of EXPLODED VIEW : C 5
Ref. No. of EXPLODED VIEW : C 9
Ref. No. of EXPLODED VIEW : C 10
39
BOTTOM ASSY
DISASSEMBLY
3. BOTTOM ASSY
and "EXPLODED VIEW"
MAIN PCB
Ref. No. of EXPLODED VIEW : C 15
SMPS PCB ASS'Y
Ref. No. of EXPLODED VIEW : C 14
SUN MODULE PCB ASS'Y
Ref. No. of EXPLODED VIEW : C 16
Advertisement
Table of Contents
