Lock Code; Indicator Switch-Off Behaviour - Miele WCA020 WCS Active Operating Instructions Manual

 Lock code
The lock code prevents the washing
machine being used without your
knowledge.
When the code has been activated, you
have to enter a code after switching the
washing machine on. Otherwise the
washing machine cannot be operated.
Options
 = Lock code switched off
(factory default setting)
 = Lock code is switched on
Using the washing machine with a
PIN code
The code is 125 and cannot be altered.
 Switch on the washing machine.
The time display shows   and 
flashes to prompt you to enter the code.
 Touch the  sensor control.
   appears on the time display.
 Confirm the number with the
 sensor control.
The first number has been saved and
you can now enter the second number
using the  sensor control.
 Enter the second and third numbers
and confirm the numbers with the
 sensor control.
The lock function is deactivated. A
wash programme can now be selected
and started.
Programmable functions


Indicator switch-off behaviour

The indicators will switch off after
10 minutes to save energy.
Options
 = Off (factory default setting)
The indicators will remain lit up
while the washing machine is
switched on.
 = On
The indicators will switch off
after 10 minutes if the
programme is started.
However, the indicators will
remain lit up for 10 minutes
after a Delay start time has
elapsed, after the end of a
programme or at the end of the
anti-crease phase.
73