Update An Existing Stringer; Select An Existing Stringer; Stringing Screen - Wilson Electronics BAIARDO Operator's Manual

UPDATE AN EXISTING STRINGER

Select icon.
Select existing stringer's initials.
Select desired units.
NOTE:
If you select KG, must know your height in metric (CM).
If you select LB, you must know your height in Feet\Inches.
Touch the check mark to confi rm.
Adjusted height of the stringer.
Touch the check mark to confi rm.

SELECT AN EXISTING STRINGER

Touch the initials of the stringer.
14
B.E.S.T™ STRINGING SCREEN
TENSION DISPLAY: The large numbers in the top of the screen display
the tension the machine is set to pull at
TOOLS: Change machine settings including pre-stretch, kg/lbs,
sound on/off, puller speed and cross string +/-
MOUNTING: For ideal height and tilt when mounting racquets
MAIN STRINGS: For ideal height and tilt when installing main strings
CROSS STRINGS: For ideal height and tilt when installing cross strings
KNOT TENSION: Apply extra tensions before tie off
BACK: Return to "Home Screen"
7.3 B.E.S.T.™ SCREEN
®
15