Table of Contents
Advertisement
CALIBR ATE
Touch icon.
Select here to restore
calibration to factory settings
Select here to manually
calibrate machine
Steps to calibrate:
1. Attach a tension meter to the machine.
2. Activate the puller head. It will pull to its current 10 KG.
3. Read your tension meter. If it does not read exactly 10 KG,
change the number on the screen.
4. Touch check mark to confi rm.
5. Repeat steps above at 20, 30, and 40 KG.
You may change to LB or KG by touching KG.
After you adjust all settings, the computer will automatically calibrate
your machine based on the 4 numbers you gave it. Your machine will
now be calibrated to your device.
26
MORE OPTIONS
Select the more options icon.
Show Wilson Tournament settings
Show total # of pulls
Reserved for future use
Return to the previous screen
7.5 OWNER'S OPTIONS
®
27
Advertisement
Table of Contents
