Advertisement
•
The HNC820G has a default IP Address of: 192.168.0.99.
Administrator's default user name is "root" and it cannot be changed. The
Administrator's default password is blank.
•
The IP Setup wizard has many additional functions that have not been
described in this QIG.
including how to set the camera's wireless configurations, it is highly
recommended that you review the IP Setup wizard's manual, located on
the CD that was included with the HNC820G's packaging. To access the
manual, click on "IP Setup & Utility" when the main page of the CD
loads. Then, in the "IP Setup and Management & Control Software"
page that follows, click on "IP Setup Manual".
•
You can also learn how to set the camera's wireless configurations by
reviewing the camera's general device user's manual, also located on the
CD that was included with the HNC820G's packaging. To access the
general device user's manual, click on "User's Manual" when the main
page of the CD loads.
•
You can access and view your network camera's images via a web browser
using two methods:
•
You can also use the included software application to view, record, and
playback the network camera's images.
For detailed explanations of these functions,
1.
In your web browser's address bar, type in
"http://IPAddressofCamera".
2.
In the IP Setup window, click on Link to selected
device.
The
18
Advertisement
