Advertisement
Note
It is highly recommended that you now go to the network camera's webpage and
ensure that the device has been configured with the appropriate network settings.
Once the IP Setup program returns a valid IP address, please go to the network
camera's homepage by either clicking on "Link to Selected Device" in the IP
Setup window, or typing the camera's IP address in your web browser's
"Address" bar. In the camera's homepage, click on "Configuration". Then, click
on "Network" in the column menu on the left side of the page. Please ensure that
your camera's network settings are consistent with your existing LAN settings. If
they are not, you can set them in the fields provided (see figure below). Once you
are sure that the camera's network settings are correct, click on "Use fixed IP
address". The camera's IP address will then always remain the same, and you can
skip having to perform the installation procedure each time the camera reboots.
Please be sure to click Save at the bottom of the page to confirm the new settings.
17
Advertisement
