Using The Stick Reader With Your Barcode Scanner - Tru-Test XRS2 Setup Manual

Setup Guide - XRS2/XRS2i Stick Reader – Connecting to a barcode scanner

Using the stick reader with your barcode scanner

5
To use the stick reader with your barcode scanner:
1. From the Home screen, select Scan to go to the Scanning screen.
2. Scan an EID tag, then scan a barcode.
The barcode will automatically populate the BARCODE field on the stick reader's display:
The maximum input length for an animal data field is 12 characters. If you scan a barcode longer than this, a
warning message will be displayed. After the warning is confirmed, the last 12 characters of the scanned
barcode will be entered into the BARCODE field.
For further information regarding your stock management system, contact Datamars Limited on 1800 621 324 (AU) or 0800 878 837 (NZ)
Issue 3, 03/2022
For technical support in New Zealand, contact 0800 AGDATA (0800 243 282)
© Datamars Limited, 2019-2022. All rights reserved.
Issue 3 02/2022
5