Pre-Charge Methods; Cleaning And Storing - Westfalia MSB800A Original Instructions Manual

Pre-Charge Methods

1. From a Battery
Connect the unit to a battery and press ON/OFF (4),
the jump starter will be fully recharged within
150 seconds.
2. From USB
The jump starter can be recharged from any
5 V
will take 40 minutes to be fully recharged. Just con-
nect the unit to the USB port, charging starts auto-
matically.
3. From a 12 V socket
The jump starter can be recharged from a donator
car's 12 V socket. Just plug in the 12 V adapter (8)
and connect it to the charging socket (3). Charging
starts automatically. It will take about 200 seconds.

Cleaning and Storing

 Before undertaking any cleaning or storing the
charger, unplug the unit.
 Clean the unit only with a moist cloth and allow it to
dry completely before using it again.
 In no case use abrasives or aggressive chemicals.
 Store the unit indoors in a dry place that is protected
from extreme temperatures.
 Regularly clean the battery clamps.
Operation
2 A USB port via the micro USB port (2). It
19